|
Product Details:
Contact Now
Chat Now
|
| Product Name: | Non-Woven Scrubber Toilet Brush Refills | Application: | Hospital Grade Sanitary Cleaning |
|---|---|---|---|
| Surface Material: | Embossed Non-Woven Scrubber Fabric, 80 Gsm | Core Material: | High-Density Polyurethane Sponge |
| Abrasion Rating: | Non-Scratch Grade, Safe On Glazed Porcelain | Refill Quantity: | 40 Heads Per Pack, 50 Packs Per Carton |
| Handle Compatibility: | Press-Fit Disposable Wand Handle, 22-26 Mm | Sterilisation Option: | EO Sterilised Or Non-Sterile Bulk |
| Color Available: | White, Blue, Custom | Packing: | Individual PE Bag, Export Carton |
| OEM Service: | Custom Die-Cut Shape, Gsm And Logo | Shelf Life: | 36 Months In Dry Storage |
| Highlight: | Non-Woven Scrubber Brush Heads,Hospital Grade Sanitary Refills,Disposable Toilet Brush Refills |
||
Most disposable heads fail at the same point: the cleaning surface tears open on a rough rim casting or a hardened limescale collar, and the operator reaches for a second head. These non-woven scrubber brush heads are built for that failure mode. The cleaning face is an 80 gsm embossed non-woven scrubber fabric bonded to a high-density polyurethane core — a combination that holds its shape under finger pressure and keeps the abrasive pattern in contact with the stain instead of flattening out. In hospital grade sanitary cleaning, the head has to survive a full bowl without shedding fibre into the water.
The non-woven layer is embossed rather than coated, so the scrubbing texture runs through the thickness of the fabric and does not rub off after a few strokes. That matters where a disposable toilet brush is used on glazed porcelain that must stay unmarked: the fabric is graded non-scratch and will not dull the glaze, while the embossed pattern still bites into dried residue along the rim and under the jet channel. Non-woven scrubber brush heads are die-cut to a shape with a rim-edge lip, press-fit onto 22–26 mm wands, and can be supplied EO sterilised in individually bagged packs for departments that require it. Bulk non-sterile packing keeps the landed cost low for general washrooms.
Supply is stable because the fabric is produced in house. Non-woven scrubber brush heads are cut on a fixed die, so the rim-edge lip stays within half a millimetre from batch to batch and the head seats the same way every time on the wand. Departments that order non-woven scrubber brush heads on a standing schedule receive the same fabric weight each month, which keeps cleaning results predictable across wards. For a first order, non-woven scrubber brush heads can be supplied in a mixed pack with sponge heads so both surfaces can be compared on site.
| Parameter | Specification |
|---|---|
| Product Type | Non-woven scrubber refill head for disposable toilet brush |
| Model Number | GL-NW40 |
| Cleaning Face | Embossed non-woven scrubber fabric, 80 gsm |
| Core | High-density polyurethane sponge |
| Abrasion Rating | Non-scratch grade, suitable for glazed porcelain |
| Head Shape | Die-cut with rim-edge lip |
| Refill Count | 40 heads per pack |
| Handle Fit | Press-fit disposable wand, 22–26 mm diameter |
| Sterilisation Option | EO sterilised or non-sterile bulk |
| Colour | White, blue or custom |
| Packing | Individual PE bag, export carton |
| Shelf Life | 36 months in dry storage |
No. The embossed fabric is graded non-scratch and sits well below the hardness of vitreous enamel and glazed porcelain. We still recommend a quick test on an inconspicuous area for unusually soft or refurbished glaze, as with any new cleaning contact material.
The non-woven face keeps an abrasive pattern in contact with the deposit, so a hardened limescale collar that needs several passes with a sponge head usually clears in one. Where the deposit is very thick, pre-wetting with warm water for a minute shortens the work further.
Yes. We offer EO sterilised heads in individually sealed bags for departments that need them, and non-sterile bulk packing for general washrooms. The sterilised version carries a separate batch record and a shorter shelf life statement.
The press-fit socket is moulded for 22–26 mm wands, which covers most disposable systems. Send a handle sample and we will verify the fit; a dedicated collar can be moulded on orders above 50,000 heads.
Stock colourways ship in 12 working days from a 2,000 pack order. Custom die-cut shapes or EO sterilised runs need 25–30 days including sterilisation and release testing.
Contact Person: Mr. Yan
Tel: +8618367076310